650mm森吉米爾型二十輥軋機
650mm Sendzimir 20 Rolls Mill
用途 Application
650mm森吉米爾型二十輥軋機是在常溫狀態下，將厚度為Max1.2mm的不銹鋼，經若干道次軋制，軋制成各類規格的具有所需厚度和表面粗糙度的冷軋帶卷。
650mm 20 rolls Sendzimir Cold Mill is used to roll Max. 1.0mm thickness stainless steel at normal temperature state to the cold rolled strip coils of different thickness and surface roughness.
性能指標 Technical data
1. 來料規格 Materials specifications
1）入口重卷段 Entry recoiling parameters
材料 Material SUS200、SUS300不銹鋼 stainless steel
來料狀態 Material state 退火冷軋料 Annealing cold rolled material
寬度 Width 450-750mm
厚度 Thickness 0.08-1.2mm
卷徑 Coil diameter Φ508/Φ1000-Φ1800mm (含襯紙 including the lining paper)
卷重 Coil weight Max 12600kg
2）軋制段 Rolling part
材料 Material SUS200、SUS300 不銹鋼 stainless steel
來料狀態 Material state 退火冷軋料 Annealing cold rolled material
寬度 Width 450-650mm
厚度 Thickness 0.08-1.2mm
卷徑 Coil diameter MaxΦ1800mm (含襯紙 including the lining paper)
卷重 Coil weight Max 11000kg
2. 成品規格 Product specification
1) 軋制段 Rolling part
寬度 Width 450-650mm
厚度 Thickness 0.05-0.3 mm
卷徑 Coil diameter MaxΦ1800mm (含襯紙 including the lining paper)
卷重 Coil weight Max 11000kg
2）出口重卷段 Outlet recoiling part
寬度 Width 450-750mm
厚度 Thickness 0.05-0.3 mm
卷徑 Coil diameter Φ508/Φ1000-Φ1800mm (含襯紙 including the lining paper)
卷重 Coil weight Max 12600kg
技術參數 Technical parameters
1. 入口重卷參數 Entry recoiling parameters
高速段 High speed period Max 190m/min 張力范圍 tension range 1.44~14.4KN
低速段 Low speed period Max 110m/min 張力范圍 tension range 2.4~24KN
卷筒 Reel Φ508×850mm
減速機速比 Speed ratio of the reducer 16.87/10.12
傳動電機 Driving motor DC67KW，0-450-1500r/min, 400V 風冷air cooling
2. 左右卷取參數 Parameters of coiling left and right
低速段 Low speed period Max 180m/min 張力范圍 tension range 13.5~135KN
高速段 High speed period Max 300m/min 張力范圍 tension range 6.5~65KN
卷筒 Reel Φ500x850mm
減速機速比 Speed ratio of the reducer 10.22/4.92
傳動電機 Driving motor DC500KW, 0-362-1200 r/min，440V，水-空冷卻 water-air cooling
3. 軋機參數 The rolling mill parameters
工作輥直徑 Working roll diameter Φ45mm
第一中間輥直徑 The first intermediate roll diameter Φ71.4mm
第二中間輥直徑 The second intermediate roll diameter 輥子直徑 the roll diameter Φ127.8mm
背襯輥軸承 The backing roll bearing Φ225mm
最大軋制力 Max. roll force 2000KN
軋制扭矩 Rolling torque 11.5KN·M/5.7KN·M
軋機開口度 The rolling mill opening 3.25mm（公稱軋輥直徑時，軋輥直徑減小，開口度增大 when in the normal roll diameter，the roll diameter decreases and the opening increases）
軋制速度 Rolling speed Max 300m/min
減速機速比 Speed ratio of the reducer 1
軋機傳動電機 The rolling mil driving motor DC500KW, 0-362-1200 r/min，440V，水-空冷卻 water-air cooling
4. 出口重卷參數 Outlet recoiling parameters
速度 Speed 190m/min 張力范圍 tension range 1.26~12.6KN
卷筒 Reel Φ508x850mm
減速機速比 Speed ratio of the reducer 12.38
傳動電機 Driving motor DC49KW，0-450-1500r/min,400V