J70500-17/ZF化成鋁膜分切機

J70500-17/ZF Aluminum Foil Slitting Machine

名稱 NameJ70500-17/ZF化成鋁膜分切機
J70500-17/ZF Aluminum foil slitting machine
原料直徑 Diameter of the raw material rollMax. Φ500mm
原料寬度 Width of the raw material rollMax.600mm
原料內徑 ID of the raw material roll3′
原料厚度 Thickness of the raw material0.02-0.12mm
分切寬度 Slitting widthMin. 5mm
收卷直徑 Diameter of windingMax. Φ450mm
收卷軸直徑 Diameter of the take-up reel3′
分切速度 Slitting speedMax. 200m/min
切割方式 Slitting modeCircular cutter
卷曲方式 Winding mode中心+表面驅動；前后兩組同時收卷
Center and surface drive; synchronous take-up of the upper and lower groups

K90500-9/ZF 500mm鋁箔復卷機檢查機

K90500-9/ZF 500mm Aluminum foil rewinding and checking machine

K90500-9/ZF 500mm鋁箔復卷機檢查機
K90500-9/ZF 500mm Aluminum foil rewinding and checking machine
1.用途 Application:
將鋁箔成品重新卷繞，以解決粘箔問題 Rewind the aluminum foil product to solve the problem of adherence
通過卷繞過程，檢查產品質量缺陷 Check the products quality in the rewinding process
將不合格重量的產品繞城小卷 Unqualified products in weight will be to rewind to small rolls
2.原料規格：厚0.05-0.11mm；寬500mm；最大外徑800mm；最大卷重600kg
Raw material specifications: thickness 0.05-0.11mm; width 500mm; Max. OD 800mm; Max. coil weight 600kg
3. 重卷后成品規格與原料卷一樣 The specifications of the products are as same as that of raw material
4. 運行速度 Running speed: 25-150m/min；工作速度 Working speed: 25-150/min
5. 收卷張力范圍：30-800N，張力無極可調 Take-up tension: 30-800N, stepless adjustment
6. 復卷后的材料應保證端面整齊，錯層誤差≤±0.1mm,塔形誤差≤±0.15mm，材料表面無擦傷壓痕、無拉伸變形，復卷后單位面積重量無變化。
The end face of the products after rewinding is neatly; the layer offset tolerance ≤±0.1mm; pyramid tolerance≤±0.15mm; there is no scratch, indentation and tensile deformation on the material surface; there is no change for the weight per unit area after rewinding.
7. 恒張力控制系統，糾偏控制系統，氣路系統均采用進口件
Use imported parts for the constant tension control system, deviation rectification control system and gas path system.
8. 電氣系統采用PLC和觸摸控制，主要電器元件采用進口件
The electrical system uses PLC and touch screen control. The main electrical parts are imported.
9. 整機外形尺寸 Overall dimension: 2700mm*1600mm*1700mm
10. 重量：主機4500kg，電器箱100kg Weight: 4500kg (main machine); 100kg (electrical cabinet)

500mm切紙切箔機

500mm Paper and Foil Slitting Machine

名稱 NameJ70500-3/ZF切紙切箔機
J70500-3/ZF Paper and foil slitting machine		J70500-5A/ZF變頻調速恒張力切紙切箔機  
J70500-5A/ZF Frequency control and constant tension paper and foil slitting machine
用途 Application設備用于分切厚度0.006-0.06mm 的紙或鋁箔（腐蝕箔）
To slit paper and aluminum foil of thickness 0.006-0.06mm		切割厚度0.006-0.06mm的紙或鋁箔（腐蝕箔）
To slit paper and aluminum foil of thickness 0.006-0.06mm
原料卷直徑
Diameter of the raw material roll		Max. Φ500mmMax. Φ500mm
原料卷寬度
Width of the raw material roll		Max.500mmMax.500mm
原料卷內徑
ID of the raw material roll		Φ35-75mmΦ35-75mm
成品卷寬度
Width of the product strip		Min. 5mmMin. 2.2mm
成品卷直徑
Diameter of the product roll		Max. Φ270mmMax. Φ270mm
切割條數 StripsMax.49 stripsMax.49 strips
收卷軸直徑
Diameter of the take-up reel		Φ40mm,75mmΦ40mm,75mm
同時收卷軸數量
Quantity of synchronous take-up reels		22
切割方式 Slitting mode圓盤刀 Circular cutter圓盤刀 Circular cutter
分切速度
Slitting speed		Max. 140m/minMax. 150m/min
切割厚度
Slitting thickness		0.006-0.06mm0.006-0.06mm
主電機 Main motor2.2kw3kw
主要功能
Main functions		采用雙差動驅動方式進行收卷，直流調速，可加吸塵裝置
Adopt dual-differential drive mode to wind; DC speed adjustment; allow to add the dust extraction device		采用雙差動驅動方式進行收卷，變頻調速，恒張力系統，可加吸塵裝置
Adopt dual-differential drive mode to wind; frequency control of speed; constant tension system; allow to add the dust extraction device
外形尺寸 Overall size1170mm*1032mm*1283mm1170mm*1032mm*1283mm
重量 Weight1000kg1000kg

J70500-12/ZF 500mm銅箔分切機

J70500-12/ZF 500mm Copper Foil Slitting Machine

名稱 NameJ70500-12/ZF 500mm 銅箔分切機
J70500-12/ZF 500mm Copper foil slitting machine
用途 Application  將成卷的銅箔切割至所需的寬度后繞成卷
To slit the roll of copper foil to required width and rewind.
原料卷直徑 Diameter of the raw material rollMax. Φ550mm
原料卷寬度 Width of the raw material rollMax.500mm
原料卷內徑 ID of the raw material rollΦ75-300mm
收卷外徑 OD of windingMax. Φ550mm (寬度50mm以上 width is more than 50mm)
收卷軸直徑 Diameter of the take-up reelΦ75mm (用戶自定 determined by user)
同時收卷軸數量 Quantity of synchronous take-up reels2
切割厚度 Slitting speed20-150m/min
分切后度 Slitting thickness＜0.12; 成品最小切割寬度 Min. width of the product strips: 6mm
主傳動電機 Main motorY132M-4; 7.5kw 1500rpm
外形尺寸 Overall size主機 Main machine1700*1450*1400(mm) 控制箱 Control box 975*670*1030(mm)
重量 Weight3000kg

J70600-2/ZF 600mm切紙切箔機

J70600-2/ZF 600mm Paper and Foil Slitter

名稱 NameJ70600-2/ZF 600mm 切紙切箔機
J70600-2/ZF 600mm Paper and Foil Slitter
用途 Application將成卷的電容器紙，鋁箔紙，薄膜切割至所需的寬度后卷繞成卷
To slit capacitor paper, aluminum foil and the thin film to the required width and  rewind.
原料卷直徑 Diameter of the raw material rollMax. Φ600mm
原料卷寬度 Width of the raw material rollMax.600mm
原料卷內徑 ID of the raw material rollΦ50-85mm
成品卷寬度 Width of the product rollMin. 6mm (鋁箔 aluminum foil 10mm)
成品卷直徑 Diameter of the product rollMax. Φ350mm (寬度50mm以上 width is more than 50mm)
剪切條數 StripsMax.59 strips
收卷軸直徑 Diameter of the take-up reelΦ50mm,75mm
同時收卷軸數量 Quantity of synchronous take-up reels2
切割方式 Slitting mode圓盤刀 Circular cutter
分切速度 Slitting speedMax. 150m/min
切割厚度 Slitting thickness0.006-0.15mm(鋁箔 aluminum foil 0.01-0.08mm)
主傳動電機 Main motor3kw
主要功能 Main functions變頻調速，配有靜電消除裝置及吹邊裝置
Frequency control of speed; static elimination device and edge blowing device
外形尺寸 Overall size1540mm*1164mm*1410mm
重量 Weight2500kg
名稱 NameJ70700-15/ZF 700mm 分切機
J70700-15/ZF 700mm Film slitting machine		J70700-3/ZF 700mm 大700m 分切機
J70700-3/ZF 700mm Film slitting machine		J7010Ⅱ-2/ZF 1000mm 分切機
J7010Ⅱ-2/ZF 1000mm Film slitting machine
用途 Application將成卷的電容器紙，鋁箔紙，薄膜切割至所需的寬度后卷繞成卷
To slit capacitor paper, aluminum foil and the thin film to the required width and rewind.		將成卷的電容器紙，薄膜切割至所需的寬度后卷繞成卷
To slit capacitor paper and the thin film to the required width and rewind.		將成卷的電容器紙，鋁箔，薄膜切割至所需的寬度后卷繞成卷
To slit capacitor paper, aluminum foil and the thin film to the required width and rewind.
原料卷直徑
Diameter of the raw material roll		Max. Φ550mmMax. Φ760mmMax. Φ800mm
原料卷寬度
Width of the raw material roll		Max.700mmMax.700mmMax.1000mm
原料卷內徑
ID of the raw material roll		Φ50-85mmΦ76-90mmΦ76mm
成品卷寬度
Width of the product strip		Min. 6mm(鋁箔 aluminum foil 10mm)Min.6mmMin.5mm
成品卷直徑
Diameter of the product roll		Max. Φ350mm
(寬度40mm以上 width more than 40mm)		Max. Φ500mm
(寬度50mm 以上 width more than 50mm)		Max. Φ500mm
(寬度40mm 以上 width more than 40mm)
條數 StripsMax.59 stripsMax.59 stripsMax.59 strips
收卷軸直徑
Diameter of the take-up reel		Φ40mm,75mmΦ76mmΦ75mm
同時收卷軸數量Quantity of synchronous take-up reels22 
切割方式
Slitting mode		Circular cutter 圓盤刀Circular cutter 圓盤刀Circular cutter 圓盤刀
分切速度
Slitting speed		Max. 150m/minMax. 150m/minMax. 200m/min
(寬度40mm以上 width more than 40mm)
切割厚度
Slitting thickness		0.006-0.06mm
(鋁箔 aluminum foil 0.01-0.03mm)		0.03-0.1mm0.03-0.1mm
糾偏精度
Error-correction precision		±0.2~±0.5mm±0.2~±0.5mm 
主電機 Main motor3kw5.5kw7.5kw
主要功能
Main functions		變頻調速，配有靜電消除及吹邊裝置 Frequency control of speed; static elimination device and edge blowing device變頻調速 Frequency control of speed變頻調速，配有靜電消除及吹邊裝置 Frequency control of speed; static elimination device and edge blowing device
外形尺寸 Overall size1605mm*1084mm*1310mm1690mm*1770mm*1560mm2410mm*1250mm*1460mm
重量 Weight2800kg3500kg4500kg

J70700-18/ZF 700mm超薄金屬化膜分切機

J70700-18/ZF 700mm Ultra Thin Metalized Films Slitter

名稱 NameJ70700-18/ZF 700mm 超薄金屬化膜分切機
J70700-18/ZF 700mm Ultra Thin Metalized Films Slitter
用途 Application將成卷的金屬化膜切割成所需寬度后卷繞成卷
To slit the roll of the metalized Films to the required width and rewind.
原料卷直徑 Diameter of the raw material rollMax. Φ600mm
原料卷寬度 Width of the raw material rollMax.700mm
原料卷內徑 ID of the raw material roll3′′-6′′
收卷直徑 Diameter of take-upΦ120mm-320mm
(寬度30mm 以上 width is more than 30mm)
產品卷寬度 Width of the product rollMin. 4.5mm
糾偏精度 Error-correct precision±0.06mm
切割厚度 Slitting thicknessOPP films 0.004-0.01mm, PET films 0.002-0.01mm
收卷軸直徑 Diameter of the take-up reelΦ75mm
同時收卷軸數量 Quantity of synchronous take-up reels2
分切速度 Slitting speed25-280m/min (無極可調 stepless adjustable)
供電總功率 Total power supply10KVA, AC 380V
賦能電壓 Energized voltageDC50V/um  Max. 900V
原料卷重量 Weight of the raw material roll＜120kg
外形尺寸 Overall sizeMain machine 1550mm*1200mm*1300mm

J70700-28/ZF 700mm金屬化膜波浪刀分切機

J70700-28/ZF 700mm Metalized Films Wavy Blade Slitter

名稱 NameJ70700-28/ZF 700mm金屬化膜波浪刀分切機
J70700-28/ZF 700mm Metalized Films Wavy Blade Slitter
用途 Application將成卷的金屬化膜切割成所需寬度后卷繞成卷
To slit the roll of the metalized Films to the required width and  rewind.
原料卷直徑 Diameter of the raw material rollMax. Φ600mm
原料卷寬度 Width of the raw material rollMax.700mm
原料卷內徑 ID of the raw material roll3′′-6′′
收卷直徑 Diameter of take-upΦ120mm-320mm(width is more than 30mm)
糾偏精度 Error-correct precision±0.06mm
切割厚度 Slitting thicknessOPP films 0.004-0.01mm, PET films 0.002-0.01mm)
收卷軸直徑 Diameter of the take-up reelΦ75mm
同時收卷軸數量 Quantity of synchronous take-up reels2
分切速度 Slitting speed25-280m/min (stepless adjustable)
供電總功率 Total power supply10KVA, AC 380V
賦能電壓 Energized voltageDC50V/um  Max. 900V
原料卷重量 Weight of the raw material roll＜120kg
外形尺寸 Overall sizeMain machine 1550mm*1200mm*1300mm

J70700-10/ZF 700mm金屬化膜分切機

J70700-10/ZF 700mm Metalized Films Slitter

名稱 NameJ70700-10/ZF 700mm金屬化膜分切機
J70700-10/ZF 700mm Metalized Films Slitter
用途 Application將成卷的OPP，PET，金屬化鍍鋁膜，鍍鋅膜切割至所需的寬度后卷繞成卷
To slit OPP films, PET films, aluminized films and the galvanized films to the required width and  rewind.
原料卷直徑 Diameter of the raw material rollMax. Φ530mm
原料卷寬度 Width of the raw material rollMax.700mm
原料卷內徑 ID of the raw material rollΦ75-150mm
成品卷寬度 Width of the product rollMin. 4.5mm
成品卷直徑 Diameter of the product rollMax. Φ330mm (寬度30mm以上 width is more than 30mm)
條數 StripsMax.80 strips
收卷軸直徑 Diameter of the take-up reelΦ75mm
同時收卷軸數量
Quantity of synchronous take-up reels		2
切割方式 Slitting modeDangling cutter 懸空刀
分切速度 Slitting speedMax. 280m/min
切割厚度 Slitting thicknessOPP films 0.004-0.015mm, PET films 0.002-0.01mm)
賦能電壓 Energized voltageDC50V-900V
糾偏精度 Error-correct precision±0.1mm
主電機 Main motor2.2kw
主要功能 Main functions具有自動糾偏系統，恒張力系統（采用美國蒙特福），賦能裝置，靜電消除裝置，PLC控制
Automatic error-correction system; constant tension system (MONTALVO); energized device; static elimination device; PLC control
外形尺寸 Overall size1950mm*1200mm*1300mm
重量 Weight1300kg

J70800-9/ZF 800mm 鋁箔分切機

J70800-9/ZF 800mm Aluminum Foil Slitting Machine

名稱 NameJ70800-9/ZF 800mm 鋁箔分切機
J70800-9/ZF 800mm Aluminum Foil Slitting Machine
原料卷直徑 Diameter of the raw material rollMax. Φ650mm
原料卷寬度 Width of the raw material rollMax.800mm
原料卷內徑 ID of the raw material roll3′′, 6′′
原料卷厚度 Thickness of the raw material roll0.006-0.06mm
分切寬度 Width of the product stripsMin. 50mm
收卷直徑 Diameter of the take-upΦ350mm
收卷軸直徑 Diameter of the take-up reel3′′
分切速度 Slitting speed300m/min
切割方式 Slitting mode直刀片 Straight cutter (刀槽軸 cutter groove shaft)
收卷方式 Take-up mode中心驅動，上下兩組同時收卷
Center drive; take-up synchronously by upper and lower groups
卸料方式 Discharge mode旋臂式卸料 Swing-arm type

H52800/ZF 800mm 鋁紙復合機

H52800/ZF 800mm Aluminum Paper Combination Machine

名稱 NameH52800/ZF 800mm 鋁紙復合機
H52800/ZF 800mm Aluminum paper combination machine
用途 Application將成卷的鋁箔和紙復合，烘干，涂蠟后卷繞成卷
Combine the aluminum foil and paper, dry, wax, and rewind to coils.
鋁箔卷直徑
Diameter of aluminum foil coil		Max. Φ350mm
紙卷直徑
Diameter of paper coil		Max. Φ800mm
原料卷內徑
ID of the material coil		Φ50mm-Φ75mm
原料卷寬度
Width of the material coil		Max.800mm
成品卷直徑
Diameter of the product coil		Max. Φ400mm
復合最高速度
Recombination velocity		Max.150m/min
烘干溫度
Drying temperature		70-100℃
浸蠟溫度
Waxdip temperature		130-180℃
主要特點 Main features復合速度高，采用多電機傳動，恒張力收卷，自動接料，自動完成收卷轉換
High combination speed, multi-motor driving, constant tension take-up, material receiving automatically, automatically exchanging for take-up
傳動電機 Driving motor5.5kw two sets
外形尺寸 Overall size7500mm*2200mm*2800mm

800mm聲學膜加熱復合機

800mm TFAT Heating and Combination Machine

型號 ModelH52800∕ZF型
用途 Application用于多種材料復合成聲學膜。用于電子、通訊行業的聲學膜材料加工。
Compound kinds of materials to TFAT. This machine is used to process TFAT in electron industry and communication industry.
特點 Features采用每次兩層材料復合技術，多種材料通過多次復合達到進口設備的復合結果。
Compound two layers of materials once. compound kinds of materials by many times to achieve the effect by imported compounding machine.
復合原料
Materials for compounding		peek、膠膜 coating、pu、硅膠膜 silicone membrane等
原料最大直徑
Diameter of the material		Max.Ф300mm
原料最大寬度 Width of the materialMax. 800mm
原料卷內徑 ID of the material3”（氣脹軸 air-expansion shaft）
原料厚度 Thickness of the material0.002—0.1mm
最高復合速度
Compounding speed		Max. 50m∕min
復合方式 Compounding mode加熱膠輥+加熱鋼輥
Heating rubber roll+ Heating steel roll
成品卷最大直徑
Product roll diameter		Max.Ф300mm
收卷軸直徑
Take-up shaft diameter		3”（氣脹軸 air-expansion shaft）
電源 Power supply三相 three phase AC380V±10%,50Hz，30kw
設備體積 The machine volume2700×1900×1720（長 length×寬 width×高 height）

H521000/ZF 1000mm鋁箔壓花機

H521000/ZF 1000mm Aluminum Foil Embossing Machine

名稱 NameH521000/ZF 1000mm鋁箔壓花機
H521000/ZF 1000mm Aluminum Foil Embossing Machine
用途 Application將鋁紙復合材料壓出所需花型后卷繞成卷
To emboss the aluminum paper composite material and rewind to coils.
原料直徑 Diameter of the raw materialΦ500mm
壓花有效寬度 Efficient embossing width800mm
原料卷內徑 ID of the raw material coil3′′
收卷直徑 Take-up diameterΦ500mm
收卷軸直徑 Diameter of take-up reel3′′
運行速度 Running speed100m/min
外形尺寸 Overall dimension2480*1540*1060mm

J7010Ⅱ-10/ZF 1000mm云母帶分切機

J7010Ⅱ-10/ZF 1000mm Mica Tape Slitting Machine

名稱 NameJ7010Ⅱ-10/ZF 1000mm云母帶分切機
J7010Ⅱ-10/ZF 1000mm Mica tape slitting machine
用途 Application將成卷的云母帶分切成所需的寬度后卷繞成卷
To slit the mica tape roll to the required width and rewind.
原料卷直徑 Diameter of the raw material rollMax. Φ600mm
原料卷寬度 Width of the raw material rollMax.1000mm
原料卷內徑 ID of the raw material rollΦ76mm
成品卷寬度 Width of the product rollMin. 25mm
成品卷直徑 Diameter of the product rollMax. Φ350mm
條數 StripsMax.40 條strips
收卷軸直徑 Diameter of the take-up reelΦ25mm (配收卷支撐機構 with take-up support mechanism)
Φ39.8mm (配收卷支撐機構 with take-up support mechanism) Φ50.2mm
同時收卷軸數量 Quantity of synchronous take-up reels2
切割方式 Slitting mode圓盤刀 Circular cutter
分切速度 Slitting speedMax. 0-150m/min
分切厚度 Slitting thickness0.08-0.2mm
主電機 Main motorY132M-4, N=7.5kw, n=1440r/min
外形尺寸 Overall size2600mm*1300mm*1550mm
重量 Weight2000kg

J7011Ⅱ-8/ZF 1100mm切紙切箔機

J7011Ⅱ-8/ZF 1100mm Paper and Foil   Slitting Machine

名稱 NameJ7011Ⅱ-8/ZF 1100mm切紙切箔機
J7011Ⅱ-8/ZF 1100mm Paper and foil slitting machine
用途 ApplicationTo slit the roll of paper and thin film to the required width and  rewind.
原料卷直徑 Diameter of the raw material rollMax. Φ800mm
原料卷寬度 Width of the raw material rollMax.1100mm
原料卷內徑 ID of the raw material rollΦ50-85mm
成品卷寬度 Width of the product rollMin. 600mm(width more than 12mm) Min. 200mm(width more than 6mm)
成品卷直徑 Diameter of the product rollMax. Φ600mm
同時收卷軸數量 Quantity of synchronous take-up reels2
切割速度 Slitting speed0- 200m/min
分切厚度 Slitting thickness0.01-0.15mm
氣源壓力 Air pressure0.5-0.7Mpa
主電機 Main motorY132M-4 7.5kw, 1440轉/分rpm
外形尺寸 Overall size主機 Main machine 2750mm*2200mm*1260mm
控制箱Control box 600mm*500mm*1600mm
重量 Weight主機 Main machine 3000kg
控制箱 Control box 100kg

J7014Ⅱ/ZF 1400mm 薄膜加熱分切機

J7014Ⅱ/ZF 1400mm Thin Film Heating Slitting Machine

名稱 NameJ7014Ⅱ/ZF 1400mm Thin film heating slitting machine
用途 Application將成卷的聚氯乙烯薄膜加熱分切成所需寬度后卷繞成卷
To heat the PVC film roll and slit to the required width, and rewind.
原料卷直徑 Diameter of the raw material rollMax. Φ500mm
原料卷寬度 Width of the raw material rollMax.1300mm
原料卷內徑 ID of the raw material rollΦ76.2mm
原料卷重量 Weight of the raw material rollMax.500kg
收料卷外徑 OD of take-up rollMax. 500mm
收料卷內經 ID of take-up rollΦ76.2mm
切割厚度 Slitting thickness0.05-0.5mm
分切方式 Slitting mode懸空刀片分切 Dangling knives slitting
分切寬度 Slitting widthMin.10mm
分切速度 Slitting speed0-15m/min
同時收卷軸數量 Quantity of synchronous take-up reels2
加熱調節控制溫度 Heating temperature control50-200℃
糾偏精度 Error-correct precision0.1
供電電壓 Power supply voltageAC 380V
電動機 motor7.5kw, 1440r/min
外形尺寸 Overall size4600mm*2115mm*1610mm
重量 Weight5500kg

J7017 Ⅱ/ZF 1700mm 光學膜分切機

J7017 Ⅱ/ZF 1700mm Optical Film Slitting Machine

名稱 NameJ7017 Ⅱ/ZF 1700mm 光學膜分切機
J7017 Ⅱ/ZF 1700mm Optical film slitting machine
原料卷直徑 Diameter of the raw material rollMax. Φ700mm
原料卷寬度 Width of the raw material rollMax.1700mm
原料卷內徑 ID of the raw material roll3′，6′
原料厚度 Thickness of the raw material0.02-0.35mm
分切條寬度 Slitting width of the stripsMin. 300mm
收卷直徑 Diameter of windingMax. Φ600mm
收卷軸直徑 Diameter of the take-up reel3′，6′
分切速度 Slitting speed20m/min
切割方式 Slitting modeAir knife
收卷方式 Winding modeCenter drive; synchronous take-up of the upper and lower groups
邊料寬度 Width of the rim charge10-20mm
邊料收卷直徑 Winding diameter of the rim chargeΦ400mm (spiral winding)
電源 Power supplyThree-phase 380V ±10%, 50Hz,20kw
外形尺寸 Overall size4200mm*3200mm*2100mm
選配件 Optional accessory料卷裝卸車 Material roll loader
名稱 NameJ70700-24/ZF 電池極片分切機
J70700-24/ZF Battery pole piece slitting machine		J70500-28/ZF 電池極片分切機
J70500-28/ZF Battery pole piece slitting machine
用途 Application用于分切鋰離子電池的電極材料
To slit the electrode material of Li-ion battery		用于分切鋰離子電池的電極材料
To slit the electrode material of Li-ion battery
原料卷直徑 Diameter of the raw material rollMax. Φ600mmMax. Φ600mm
原料卷寬度 Width of the raw material rollMax.700mm (常用 usually use 650mm)Max.520mm
原料卷內徑 ID of the raw material rollΦ75mm (兩端錐套 taper sleeves of both ends)Φ75mm (兩端錐套 taper sleeves of both ends)
成品卷直徑 Diameter of the product rollMax. Φ450 (寬度30mm以上 width is more than 30mm)Max. Φ450 (寬度30mm以上 width is more than 30mm)
成品卷最小寬度 Width of the product stripMin. 36mmMin.30mm
放卷糾偏精度 Error-correct precision of pay-off±0.1mm±0.01mm
切割厚度 Slitting thickness總厚度Total thickness 100-350μm,
鋁箔Aluminum foil 10-30μm, 銅箔copper foil 8-20μm		總厚度Total thickness 100-350μm,
鋁箔Aluminum foil 10-30μm, 銅箔copper foil 8-20μm
收卷軸直徑 Diameter of the take-up reel3′′ (氣脹機械滑差軸 mechanical air slip shaft)3′′ (氣脹機械滑差軸 mechanical air slip shaft)
同時收卷軸數量 Quantity of synchronous take-up reels22
分切速度 Slitting speed50m/min (連續可調 adjustable continuously)
正常速度 common speed 5-30m/min		50m/min (連續可調 adjustable continuously)
正常速度 common speed 5-30m/min
電源 Power supply三相四線式 Three-phase four-wire 380V三相四線式 Three-phase four-wire 380V
分切寬度精度 Slitting width precision±0.1mm±0.1mm
分切極片毛刺 Slitted Pole piece burr＜10μm (涂布層外 out of the coating layer)＜10μm (涂布層外 out of the coating layer)
外形尺寸 Overall size主機 Main machine 2450mm*1950mm*2200mm主機 Main machine 2300mm*1950mm*2200mm

J8608/ZF 8米套管纏繞機  

J8608/ZF 8 Meters Sleeve Winding Machine

1、卷繞長度 Winding length                                8000mm（Max）

2、卷繞成品直徑 Product diameter                            80mm～1000mm（Max）

3、卷繞成品重量 Product weight                            1500Kg（Max）

4、皺紋紙帶 Crepe paper tape                       整盤重 the coil weight             8Kg（Max）

寬度 Width                           76mm

厚度 Thickness                      0.305mm

最大外徑 Max. OD               500mm

內徑 ID                                  76mm

5、紙帶張力檢測與調整 The tension detection and adjustment of the paper tape

張力大小0～10Kg，自動調整Tension 0-10kg, adjust automatically

6、送紙小車的行走速度與主軸轉速按工藝要求匹配，疊包率：1/2

The moving speed of the paper sending car matches with the rotation of the main shaft according to the process requirements.  Overlapping ratio:1/2

7、車頭中心高 Height of the head center                    1250mm

8、主軸0～200rpm無級調速，并帶有停車、倒轉功能

0-200rpm stepless speed adjustment for the main shaft. It has the functions of stop and  reversing

9、帶有3個夾頭自動居中的卡盤，卡盤最大夾持直徑160mm

The automatically centering chuck with 3 clamping heads; Max. clamping diameter of the chuck 160mm

10、配有靜電消除器，自動消除紙卷表面靜電

It has electrostatic eliminator which can eliminator static electricity from the paper surface automatically

11、配有自動激光標線定位 With laser marking positioning

TYJ-160型套管電容芯子條卷機(J8616-2/ZF)

TYJ-160 Sleeve Capacitor Core Lap Former (J8616-2/ZF)

1. 卷繞長度 Winding length                    ≦16m

2. 卷繞成品直徑 Winding product diameter                最大 Max. Ф650mm

3. 芯管外徑范圍 OD range of the core tube                Ф81～Ф150mm

4. 芯管內徑范圍 ID range of the core tube              Ф51～Ф130mm

5. 芯管最大長度 Max. length of the core tube                16m

6. 卷繞芯子（工件）最大重量 Max. core weight       4噸 tons

7. 包扎紙帶 Bandaging tape

寬度 Width                90mm

紙卷外徑 OD of the paper coil            Ф470mm

紙卷內徑 ID of the paper coil            Ф76mm

平板紙帶厚度 Flat paper tape         0.09～0.13mm

皺紋紙帶厚度 Crepe paper tape         0.305mm；延伸率 Elongation 55%

8. 放紙小車一次可裝紙盤6盤紙卷；可裝鋁箔卷1盤

6 paper coils can be installed in the paper seeding car; 1 aluminum foil coil can be installed

9. 紙帶張力檢測與調整

平板紙帶 Flat paper tape              自動/手動調整 Automatically/Manually adjustment

皺紋紙帶 Crepe paper tape              自動調整 Automatically adjustment

10. 放紙小車的行走速度與主軸轉速按工藝要求匹配，疊包率：50%±0.5mm

The moving speed of the paper sending car matches with the rotation of the main shaft according to the process requirements.  Overlapping ratio: 50%±0.5mm

11. 車頭中心高 The height of the head center           1180mm

12. 主軸10～240rpm無級調速，有剎車離合裝置

10-240rpm stepless speed adjustment for the main shaft; with the brake clutch device

13. 配有靜電消除裝置，自動消除紙卷表面靜電

It has  electrostatic eliminator which can eliminator static electricity from  the paper surface automatically

14. 配有加熱輥，最高溫度300℃±20℃，自動控溫

It contains heating roll; Max. temperature is 300℃±20℃; automatic temperature control

15. 配有烘燈，烘烤長度16m，加熱管雙排26根。距離工件200mm處溫度為70±5℃

It has the oven lamp with 16m bake length. 26 pcs of the heating tubes in two rows. The temperature is 70±5℃ 200mm away from the workpiece

16. 配有自動激光標線，兩端定位，距離15m。自動移動范圍，左端0-7300mm，右端4200-15000mm；標線重復精度1mm

It has the automatic laser marking  positioning in two ends. The distance is 15 m. the automatic moving range, left end 0-7300mm, right end 4200-15000mm; Marking repeatability is 1mm

J83-6/ZF型3米套管卷繞機

J83-6/ZF 3 Meters Sleeve Winding Machine

1. 卷繞能力 Winding capability                                        0～20m/min 

2. 套管外徑 Sleeve OD                                                    MaxΦ220mm

3. 卷繞寬度 Winding width                                             Max3000mm

4. 托輥加熱溫度 Supporting roller heating temperature   50℃～150℃

5. 芯管內徑 Core tube ID                                  Min Φ26mm、Max Φ94mm

6. 芯管外徑 Core tube OD                                Min Φ37mm、Max Φ101mm

7. 芯管長度 Core tube length                            Min 1220mm、Max 3370mm

8. 紙張預干燥 Paper pre-drying                   由紅外加熱器加熱 heated by infrared heater

9. 鋁箔插入點激光自動指示

Laser automatic indication in the insertion point of the aluminum foil                                             指示范圍 indication range   左 left 0～1m，右 right 0.6～3m

10. 原紙卷重量 Paper coil weight                             Max 600Kg

11. 原紙卷外徑 Paper coil OD                                  Max 600mm

12. 紙卷內孔直徑 Inner hole diameter of the paper coil         Φ76mm、Φ90mm

13. 紙張寬度 Paper width    

平板紙 Flat paper    3m/2m/1m

皺紋紙 Crepe paper 1.5m×2

14. 紙張厚度 Paper thickness    平板紙 Flat paper 0.09～0.15mm; 皺紋紙 Crepe paper 0.305mm

15 .平板紙紙張張力 Flat paper tension Max 500N/m

J8008-10/ZF 型多元件線圈繞線機

J8008-10/ZF Multicomponent Winding Machine

繞線轉速 Winding speed0～200rpm,無極可調
繞制材料 Winding material漆包線
繞制線徑 Winding diameter0.05mm～0.35mm
工位數 Work position number等徑或變徑單元，數量≤30 個
Equal diameter or different diameter, quantity ≤30
排線行程 Traverse stroke≥200mm
排線寬度 Traverse width0.05mm～1mm
匝數精度 Turns precision±0.5 匝turns
電源電壓 Power voltageAC220V±5%,50Hz/(60Hz)
設備總功率 Total power≤1.5KW
安全標準 Safety standard符合 CE 要求 Conform to CE requirements
設備外形 Overall size600X400X400(mm)
設備能滿足工裝為塔型（變徑）及圓柱型（等徑）多組元件的繞制。
The equipment can meet the winding requirements of many components in tower shape (different diameter) and column shape (equal diameter).
該設備將繞線機構和排線機構合為一體，繞線主軸邊旋轉繞線邊沿 X 軸向移動，實現繞排一體。
This equipment combines the winding mechanism and traverse mechanism together. The winding main shaft winds with rotation as moves in X-axis direction to realize the winding and traversing in one.
該設備的放線機構增加了 Z 向升降功能，從而實現多組不等經塔型元件的自動跨槽連續繞制功能。
The equipment adds Z direction lifting function in the pay-off mechanism, which can realize groove crossing continuous winding automatically for different diameter tower shape components.
該設備繞制工裝的設計，在工裝基礎上增加自動跨線槽，實現多個元件的連續繞制。
The equipment adds the wire groove crossing on the basis of tooling which can realize continuous winding for many components.
該設備采用 CNC 數控系統，根據不同產品及工藝要求調用不同程序，操作極其方便。
This equipment adopts CNC numerical control system. It will call the different programme according to the different products and technique requirements. It can operate conveniently.

P74009/ZF 型紅外焦平面探測器自動粘片機

P74009/ZF  Infrared Focal Plane Detector Automatic Die Bonder

玻璃基板尺寸 Glass base plate size3″/4″/6″，厚度 thickness 4mm～7mm
晶片材料 Crystal chip material碲鋅鎘、銻化銦 CdZnTe、 InSn
晶片尺寸 Crystal chip size規則晶片 Regular crystal chip 3×10mm（Min）80×80mm（Max）
不規則晶片 Irregular crystal chip（圓弧直徑 Arc diameter）≤120mm
加熱溫度 Heating temperature25℃～80℃（可定可調 adjustable）
陪邊 Edge規則晶片要有陪邊： 4 條，寬度 4mm
The regular crystal chip with edges: 4, thickness 4mm
陪邊要求 Edge requirement100 倍放大鏡檢測下人工輔助完成無明顯縫隙拼接
Accomplish no obvious gap splicing manually under the test by 100 times magnifying glass
用途：自動粘片機主要用于碲鋅鎘、銻化銦等紅外器件晶片的自動粘接。
Application: the automatic die bonder is mainly used to bond CdZnTe and InSn Infrared crystal chip automatically.
晶片上表面與基板上表面平行，允差≤2μm（晶片與基板自身平面度≤2μm）
The crystal chip surface is parallel with the base plate surface. Tolerance≤2μm (Flatness of the crystal chip and the base plate ≤2μm) 
粘接完固化采用常溫自然冷卻 solidification after bonding uses natural cooling in normal temperature
設備組成：設備由底座、上料機構、抓取機構、滴蠟機構、旋轉載片臺、擠壓機構、下料機構、三維平臺、大理石臺面、放料工位、防護門罩和電氣控制系統等組成。
The equipment composition: the base, material feeding mechanism, grab mechanism, wax dripping mechanism, rotary chip stage, extruding mechanism, unloading mechanism, 3D platform, marble table, material discharging position, protection door cover and electrical control system etc.