J70500-17/ZF化成鋁膜分切機
J70500-17/ZF Aluminum Foil Slitting Machine
| 名稱 Name | J70500-17/ZF化成鋁膜分切機 J70500-17/ZF Aluminum foil slitting machine |
| 原料直徑 Diameter of the raw material roll | Max. Φ500mm |
| 原料寬度 Width of the raw material roll | Max.600mm |
| 原料內徑 ID of the raw material roll | 3′ |
| 原料厚度 Thickness of the raw material | 0.02-0.12mm |
| 分切寬度 Slitting width | Min. 5mm |
| 收卷直徑 Diameter of winding | Max. Φ450mm |
| 收卷軸直徑 Diameter of the take-up reel | 3′ |
| 分切速度 Slitting speed | Max. 200m/min |
| 切割方式 Slitting mode | Circular cutter |
| 卷曲方式 Winding mode | 中心+表面驅動；前后兩組同時收卷 Center and surface drive; synchronous take-up of the upper and lower groups |
K90500-9/ZF 500mm鋁箔復卷機檢查機
K90500-9/ZF 500mm Aluminum foil rewinding and checking machine
| K90500-9/ZF 500mm鋁箔復卷機檢查機 K90500-9/ZF 500mm Aluminum foil rewinding and checking machine |
| 1.用途 Application: 將鋁箔成品重新卷繞，以解決粘箔問題 Rewind the aluminum foil product to solve the problem of adherence 通過卷繞過程，檢查產品質量缺陷 Check the products quality in the rewinding process 將不合格重量的產品繞城小卷 Unqualified products in weight will be to rewind to small rolls |
| 2.原料規格：厚0.05-0.11mm；寬500mm；最大外徑800mm；最大卷重600kg Raw material specifications: thickness 0.05-0.11mm; width 500mm; Max. OD 800mm; Max. coil weight 600kg |
| 3. 重卷后成品規格與原料卷一樣 The specifications of the products are as same as that of raw material |
| 4. 運行速度 Running speed: 25-150m/min；工作速度 Working speed: 25-150/min |
| 5. 收卷張力范圍：30-800N，張力無極可調 Take-up tension: 30-800N, stepless adjustment |
| 6. 復卷后的材料應保證端面整齊，錯層誤差≤±0.1mm,塔形誤差≤±0.15mm，材料表面無擦傷壓痕、無拉伸變形，復卷后單位面積重量無變化。 The end face of the products after rewinding is neatly; the layer offset tolerance ≤±0.1mm; pyramid tolerance≤±0.15mm; there is no scratch, indentation and tensile deformation on the material surface; there is no change for the weight per unit area after rewinding. |
| 7. 恒張力控制系統，糾偏控制系統，氣路系統均采用進口件 Use imported parts for the constant tension control system, deviation rectification control system and gas path system. |
| 8. 電氣系統采用PLC和觸摸控制，主要電器元件采用進口件 The electrical system uses PLC and touch screen control. The main electrical parts are imported. |
| 9. 整機外形尺寸 Overall dimension: 2700mm*1600mm*1700mm |
| 10. 重量：主機4500kg，電器箱100kg Weight: 4500kg (main machine); 100kg (electrical cabinet) |
500mm切紙切箔機
500mm Paper and Foil Slitting Machine
| 名稱 Name | J70500-3/ZF切紙切箔機 J70500-3/ZF Paper and foil slitting machine | J70500-5A/ZF變頻調速恒張力切紙切箔機 J70500-5A/ZF Frequency control and constant tension paper and foil slitting machine |
| 用途 Application | 設備用于分切厚度0.006-0.06mm 的紙或鋁箔（腐蝕箔） To slit paper and aluminum foil of thickness 0.006-0.06mm | 切割厚度0.006-0.06mm的紙或鋁箔（腐蝕箔） To slit paper and aluminum foil of thickness 0.006-0.06mm |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ500mm | Max. Φ500mm |
| 原料卷寬度 Width of the raw material roll | Max.500mm | Max.500mm |
| 原料卷內徑 ID of the raw material roll | Φ35-75mm | Φ35-75mm |
| 成品卷寬度 Width of the product strip | Min. 5mm | Min. 2.2mm |
| 成品卷直徑 Diameter of the product roll | Max. Φ270mm | Max. Φ270mm |
| 切割條數 Strips | Max.49 strips | Max.49 strips |
| 收卷軸直徑 Diameter of the take-up reel | Φ40mm,75mm | Φ40mm,75mm |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 | 2 |
| 切割方式 Slitting mode | 圓盤刀 Circular cutter | 圓盤刀 Circular cutter |
| 分切速度 Slitting speed | Max. 140m/min | Max. 150m/min |
| 切割厚度 Slitting thickness | 0.006-0.06mm | 0.006-0.06mm |
| 主電機 Main motor | 2.2kw | 3kw |
| 主要功能 Main functions | 采用雙差動驅動方式進行收卷，直流調速，可加吸塵裝置 Adopt dual-differential drive mode to wind; DC speed adjustment; allow to add the dust extraction device | 采用雙差動驅動方式進行收卷，變頻調速，恒張力系統，可加吸塵裝置 Adopt dual-differential drive mode to wind; frequency control of speed; constant tension system; allow to add the dust extraction device |
| 外形尺寸 Overall size | 1170mm*1032mm*1283mm | 1170mm*1032mm*1283mm |
| 重量 Weight | 1000kg | 1000kg |
J70500-12/ZF 500mm銅箔分切機
J70500-12/ZF 500mm Copper Foil Slitting Machine
| 名稱 Name | J70500-12/ZF 500mm 銅箔分切機 J70500-12/ZF 500mm Copper foil slitting machine |
| 用途 Application | 將成卷的銅箔切割至所需的寬度后繞成卷 To slit the roll of copper foil to required width and rewind. |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ550mm |
| 原料卷寬度 Width of the raw material roll | Max.500mm |
| 原料卷內徑 ID of the raw material roll | Φ75-300mm |
| 收卷外徑 OD of winding | Max. Φ550mm (寬度50mm以上 width is more than 50mm) |
| 收卷軸直徑 Diameter of the take-up reel | Φ75mm (用戶自定 determined by user) |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 |
| 切割厚度 Slitting speed | 20-150m/min |
| 分切后度 Slitting thickness | ＜0.12; 成品最小切割寬度 Min. width of the product strips: 6mm |
| 主傳動電機 Main motor | Y132M-4; 7.5kw 1500rpm |
| 外形尺寸 Overall size | 主機 Main machine1700*1450*1400(mm) 控制箱 Control box 975*670*1030(mm) |
| 重量 Weight | 3000kg |
J70600-2/ZF 600mm切紙切箔機
J70600-2/ZF 600mm Paper and Foil Slitter
| 名稱 Name | J70600-2/ZF 600mm 切紙切箔機 J70600-2/ZF 600mm Paper and Foil Slitter |
| 用途 Application | 將成卷的電容器紙，鋁箔紙，薄膜切割至所需的寬度后卷繞成卷 To slit capacitor paper, aluminum foil and the thin film to the required width and rewind. |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ600mm |
| 原料卷寬度 Width of the raw material roll | Max.600mm |
| 原料卷內徑 ID of the raw material roll | Φ50-85mm |
| 成品卷寬度 Width of the product roll | Min. 6mm (鋁箔 aluminum foil 10mm) |
| 成品卷直徑 Diameter of the product roll | Max. Φ350mm (寬度50mm以上 width is more than 50mm) |
| 剪切條數 Strips | Max.59 strips |
| 收卷軸直徑 Diameter of the take-up reel | Φ50mm,75mm |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 |
| 切割方式 Slitting mode | 圓盤刀 Circular cutter |
| 分切速度 Slitting speed | Max. 150m/min |
| 切割厚度 Slitting thickness | 0.006-0.15mm(鋁箔 aluminum foil 0.01-0.08mm) |
| 主傳動電機 Main motor | 3kw |
| 主要功能 Main functions | 變頻調速，配有靜電消除裝置及吹邊裝置 Frequency control of speed; static elimination device and edge blowing device |
| 外形尺寸 Overall size | 1540mm*1164mm*1410mm |
| 重量 Weight | 2500kg |
| 名稱 Name | J70700-15/ZF 700mm 分切機 J70700-15/ZF 700mm Film slitting machine | J70700-3/ZF 700mm 大700m 分切機 J70700-3/ZF 700mm Film slitting machine | J7010Ⅱ-2/ZF 1000mm 分切機 J7010Ⅱ-2/ZF 1000mm Film slitting machine |
| 用途 Application | 將成卷的電容器紙，鋁箔紙，薄膜切割至所需的寬度后卷繞成卷 To slit capacitor paper, aluminum foil and the thin film to the required width and rewind. | 將成卷的電容器紙，薄膜切割至所需的寬度后卷繞成卷 To slit capacitor paper and the thin film to the required width and rewind. | 將成卷的電容器紙，鋁箔，薄膜切割至所需的寬度后卷繞成卷 To slit capacitor paper, aluminum foil and the thin film to the required width and rewind. |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ550mm | Max. Φ760mm | Max. Φ800mm |
| 原料卷寬度 Width of the raw material roll | Max.700mm | Max.700mm | Max.1000mm |
| 原料卷內徑 ID of the raw material roll | Φ50-85mm | Φ76-90mm | Φ76mm |
| 成品卷寬度 Width of the product strip | Min. 6mm(鋁箔 aluminum foil 10mm) | Min.6mm | Min.5mm |
| 成品卷直徑 Diameter of the product roll | Max. Φ350mm (寬度40mm以上 width more than 40mm) | Max. Φ500mm (寬度50mm 以上 width more than 50mm) | Max. Φ500mm (寬度40mm 以上 width more than 40mm) |
| 條數 Strips | Max.59 strips | Max.59 strips | Max.59 strips |
| 收卷軸直徑 Diameter of the take-up reel | Φ40mm,75mm | Φ76mm | Φ75mm |
| 同時收卷軸數量Quantity of synchronous take-up reels | 2 | 2 | |
| 切割方式 Slitting mode | Circular cutter 圓盤刀 | Circular cutter 圓盤刀 | Circular cutter 圓盤刀 |
| 分切速度 Slitting speed | Max. 150m/min | Max. 150m/min | Max. 200m/min (寬度40mm以上 width more than 40mm) |
| 切割厚度 Slitting thickness | 0.006-0.06mm (鋁箔 aluminum foil 0.01-0.03mm) | 0.03-0.1mm | 0.03-0.1mm |
| 糾偏精度 Error-correction precision | ±0.2~±0.5mm | ±0.2~±0.5mm | |
| 主電機 Main motor | 3kw | 5.5kw | 7.5kw |
| 主要功能 Main functions | 變頻調速，配有靜電消除及吹邊裝置 Frequency control of speed; static elimination device and edge blowing device | 變頻調速 Frequency control of speed | 變頻調速，配有靜電消除及吹邊裝置 Frequency control of speed; static elimination device and edge blowing device |
| 外形尺寸 Overall size | 1605mm*1084mm*1310mm | 1690mm*1770mm*1560mm | 2410mm*1250mm*1460mm |
| 重量 Weight | 2800kg | 3500kg | 4500kg |
J70700-18/ZF 700mm超薄金屬化膜分切機
J70700-18/ZF 700mm Ultra Thin Metalized Films Slitter
| 名稱 Name | J70700-18/ZF 700mm 超薄金屬化膜分切機 J70700-18/ZF 700mm Ultra Thin Metalized Films Slitter |
| 用途 Application | 將成卷的金屬化膜切割成所需寬度后卷繞成卷 To slit the roll of the metalized Films to the required width and rewind. |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ600mm |
| 原料卷寬度 Width of the raw material roll | Max.700mm |
| 原料卷內徑 ID of the raw material roll | 3′′-6′′ |
| 收卷直徑 Diameter of take-up | Φ120mm-320mm (寬度30mm 以上 width is more than 30mm) |
| 產品卷寬度 Width of the product roll | Min. 4.5mm |
| 糾偏精度 Error-correct precision | ±0.06mm |
| 切割厚度 Slitting thickness | OPP films 0.004-0.01mm, PET films 0.002-0.01mm |
| 收卷軸直徑 Diameter of the take-up reel | Φ75mm |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 |
| 分切速度 Slitting speed | 25-280m/min (無極可調 stepless adjustable) |
| 供電總功率 Total power supply | 10KVA, AC 380V |
| 賦能電壓 Energized voltage | DC50V/um Max. 900V |
| 原料卷重量 Weight of the raw material roll | ＜120kg |
| 外形尺寸 Overall size | Main machine 1550mm*1200mm*1300mm |
J70700-28/ZF 700mm金屬化膜波浪刀分切機
J70700-28/ZF 700mm Metalized Films Wavy Blade Slitter
| 名稱 Name | J70700-28/ZF 700mm金屬化膜波浪刀分切機 J70700-28/ZF 700mm Metalized Films Wavy Blade Slitter |
| 用途 Application | 將成卷的金屬化膜切割成所需寬度后卷繞成卷 To slit the roll of the metalized Films to the required width and rewind. |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ600mm |
| 原料卷寬度 Width of the raw material roll | Max.700mm |
| 原料卷內徑 ID of the raw material roll | 3′′-6′′ |
| 收卷直徑 Diameter of take-up | Φ120mm-320mm(width is more than 30mm) |
| 糾偏精度 Error-correct precision | ±0.06mm |
| 切割厚度 Slitting thickness | OPP films 0.004-0.01mm, PET films 0.002-0.01mm) |
| 收卷軸直徑 Diameter of the take-up reel | Φ75mm |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 |
| 分切速度 Slitting speed | 25-280m/min (stepless adjustable) |
| 供電總功率 Total power supply | 10KVA, AC 380V |
| 賦能電壓 Energized voltage | DC50V/um Max. 900V |
| 原料卷重量 Weight of the raw material roll | ＜120kg |
| 外形尺寸 Overall size | Main machine 1550mm*1200mm*1300mm |
J70700-10/ZF 700mm金屬化膜分切機
J70700-10/ZF 700mm Metalized Films Slitter
| 名稱 Name | J70700-10/ZF 700mm金屬化膜分切機 J70700-10/ZF 700mm Metalized Films Slitter |
| 用途 Application | 將成卷的OPP，PET，金屬化鍍鋁膜，鍍鋅膜切割至所需的寬度后卷繞成卷 To slit OPP films, PET films, aluminized films and the galvanized films to the required width and rewind. |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ530mm |
| 原料卷寬度 Width of the raw material roll | Max.700mm |
| 原料卷內徑 ID of the raw material roll | Φ75-150mm |
| 成品卷寬度 Width of the product roll | Min. 4.5mm |
| 成品卷直徑 Diameter of the product roll | Max. Φ330mm (寬度30mm以上 width is more than 30mm) |
| 條數 Strips | Max.80 strips |
| 收卷軸直徑 Diameter of the take-up reel | Φ75mm |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 |
| 切割方式 Slitting mode | Dangling cutter 懸空刀 |
| 分切速度 Slitting speed | Max. 280m/min |
| 切割厚度 Slitting thickness | OPP films 0.004-0.015mm, PET films 0.002-0.01mm) |
| 賦能電壓 Energized voltage | DC50V-900V |
| 糾偏精度 Error-correct precision | ±0.1mm |
| 主電機 Main motor | 2.2kw |
| 主要功能 Main functions | 具有自動糾偏系統，恒張力系統（采用美國蒙特福），賦能裝置，靜電消除裝置，PLC控制 Automatic error-correction system; constant tension system (MONTALVO); energized device; static elimination device; PLC control |
| 外形尺寸 Overall size | 1950mm*1200mm*1300mm |
| 重量 Weight | 1300kg |
J70800-9/ZF 800mm 鋁箔分切機
J70800-9/ZF 800mm Aluminum Foil Slitting Machine
| 名稱 Name | J70800-9/ZF 800mm 鋁箔分切機 J70800-9/ZF 800mm Aluminum Foil Slitting Machine |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ650mm |
| 原料卷寬度 Width of the raw material roll | Max.800mm |
| 原料卷內徑 ID of the raw material roll | 3′′, 6′′ |
| 原料卷厚度 Thickness of the raw material roll | 0.006-0.06mm |
| 分切寬度 Width of the product strips | Min. 50mm |
| 收卷直徑 Diameter of the take-up | Φ350mm |
| 收卷軸直徑 Diameter of the take-up reel | 3′′ |
| 分切速度 Slitting speed | 300m/min |
| 切割方式 Slitting mode | 直刀片 Straight cutter (刀槽軸 cutter groove shaft) |
| 收卷方式 Take-up mode | 中心驅動，上下兩組同時收卷 Center drive; take-up synchronously by upper and lower groups |
| 卸料方式 Discharge mode | 旋臂式卸料 Swing-arm type |
H52800/ZF 800mm 鋁紙復合機
H52800/ZF 800mm Aluminum Paper Combination Machine
| 名稱 Name | H52800/ZF 800mm 鋁紙復合機 H52800/ZF 800mm Aluminum paper combination machine |
| 用途 Application | 將成卷的鋁箔和紙復合，烘干，涂蠟后卷繞成卷 Combine the aluminum foil and paper, dry, wax, and rewind to coils. |
| 鋁箔卷直徑 Diameter of aluminum foil coil | Max. Φ350mm |
| 紙卷直徑 Diameter of paper coil | Max. Φ800mm |
| 原料卷內徑 ID of the material coil | Φ50mm-Φ75mm |
| 原料卷寬度 Width of the material coil | Max.800mm |
| 成品卷直徑 Diameter of the product coil | Max. Φ400mm |
| 復合最高速度 Recombination velocity | Max.150m/min |
| 烘干溫度 Drying temperature | 70-100℃ |
| 浸蠟溫度 Waxdip temperature | 130-180℃ |
| 主要特點 Main features | 復合速度高，采用多電機傳動，恒張力收卷，自動接料，自動完成收卷轉換 High combination speed, multi-motor driving, constant tension take-up, material receiving automatically, automatically exchanging for take-up |
| 傳動電機 Driving motor | 5.5kw two sets |
| 外形尺寸 Overall size | 7500mm*2200mm*2800mm |
800mm聲學膜加熱復合機
800mm TFAT Heating and Combination Machine
| 型號 Model | H52800∕ZF型 |
| 用途 Application | 用于多種材料復合成聲學膜。用于電子、通訊行業的聲學膜材料加工。 Compound kinds of materials to TFAT. This machine is used to process TFAT in electron industry and communication industry. |
| 特點 Features | 采用每次兩層材料復合技術，多種材料通過多次復合達到進口設備的復合結果。 Compound two layers of materials once. compound kinds of materials by many times to achieve the effect by imported compounding machine. |
| 復合原料 Materials for compounding | peek、膠膜 coating、pu、硅膠膜 silicone membrane等 |
| 原料最大直徑 Diameter of the material | Max.Ф300mm |
| 原料最大寬度 Width of the material | Max. 800mm |
| 原料卷內徑 ID of the material | 3”（氣脹軸 air-expansion shaft） |
| 原料厚度 Thickness of the material | 0.002—0.1mm |
| 最高復合速度 Compounding speed | Max. 50m∕min |
| 復合方式 Compounding mode | 加熱膠輥+加熱鋼輥 Heating rubber roll+ Heating steel roll |
| 成品卷最大直徑 Product roll diameter | Max.Ф300mm |
| 收卷軸直徑 Take-up shaft diameter | 3”（氣脹軸 air-expansion shaft） |
| 電源 Power supply | 三相 three phase AC380V±10%,50Hz，30kw |
| 設備體積 The machine volume | 2700×1900×1720（長 length×寬 width×高 height） |
H521000/ZF 1000mm鋁箔壓花機
H521000/ZF 1000mm Aluminum Foil Embossing Machine
| 名稱 Name | H521000/ZF 1000mm鋁箔壓花機 H521000/ZF 1000mm Aluminum Foil Embossing Machine |
| 用途 Application | 將鋁紙復合材料壓出所需花型后卷繞成卷 To emboss the aluminum paper composite material and rewind to coils. |
| 原料直徑 Diameter of the raw material | Φ500mm |
| 壓花有效寬度 Efficient embossing width | 800mm |
| 原料卷內徑 ID of the raw material coil | 3′′ |
| 收卷直徑 Take-up diameter | Φ500mm |
| 收卷軸直徑 Diameter of take-up reel | 3′′ |
| 運行速度 Running speed | 100m/min |
| 外形尺寸 Overall dimension | 2480*1540*1060mm |
J7010Ⅱ-10/ZF 1000mm云母帶分切機
J7010Ⅱ-10/ZF 1000mm Mica Tape Slitting Machine
| 名稱 Name | J7010Ⅱ-10/ZF 1000mm云母帶分切機 J7010Ⅱ-10/ZF 1000mm Mica tape slitting machine |
| 用途 Application | 將成卷的云母帶分切成所需的寬度后卷繞成卷 To slit the mica tape roll to the required width and rewind. |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ600mm |
| 原料卷寬度 Width of the raw material roll | Max.1000mm |
| 原料卷內徑 ID of the raw material roll | Φ76mm |
| 成品卷寬度 Width of the product roll | Min. 25mm |
| 成品卷直徑 Diameter of the product roll | Max. Φ350mm |
| 條數 Strips | Max.40 條strips |
| 收卷軸直徑 Diameter of the take-up reel | Φ25mm (配收卷支撐機構 with take-up support mechanism) Φ39.8mm (配收卷支撐機構 with take-up support mechanism) Φ50.2mm |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 |
| 切割方式 Slitting mode | 圓盤刀 Circular cutter |
| 分切速度 Slitting speed | Max. 0-150m/min |
| 分切厚度 Slitting thickness | 0.08-0.2mm |
| 主電機 Main motor | Y132M-4, N=7.5kw, n=1440r/min |
| 外形尺寸 Overall size | 2600mm*1300mm*1550mm |
| 重量 Weight | 2000kg |
J7011Ⅱ-8/ZF 1100mm切紙切箔機
J7011Ⅱ-8/ZF 1100mm Paper and Foil Slitting Machine
| 名稱 Name | J7011Ⅱ-8/ZF 1100mm切紙切箔機 J7011Ⅱ-8/ZF 1100mm Paper and foil slitting machine |
| 用途 Application | To slit the roll of paper and thin film to the required width and rewind. |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ800mm |
| 原料卷寬度 Width of the raw material roll | Max.1100mm |
| 原料卷內徑 ID of the raw material roll | Φ50-85mm |
| 成品卷寬度 Width of the product roll | Min. 600mm(width more than 12mm) Min. 200mm(width more than 6mm) |
| 成品卷直徑 Diameter of the product roll | Max. Φ600mm |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 |
| 切割速度 Slitting speed | 0- 200m/min |
| 分切厚度 Slitting thickness | 0.01-0.15mm |
| 氣源壓力 Air pressure | 0.5-0.7Mpa |
| 主電機 Main motor | Y132M-4 7.5kw, 1440轉/分rpm |
| 外形尺寸 Overall size | 主機 Main machine 2750mm*2200mm*1260mm 控制箱Control box 600mm*500mm*1600mm |
| 重量 Weight | 主機 Main machine 3000kg 控制箱 Control box 100kg |
J7014Ⅱ/ZF 1400mm 薄膜加熱分切機
J7014Ⅱ/ZF 1400mm Thin Film Heating Slitting Machine
| 名稱 Name | J7014Ⅱ/ZF 1400mm Thin film heating slitting machine |
| 用途 Application | 將成卷的聚氯乙烯薄膜加熱分切成所需寬度后卷繞成卷 To heat the PVC film roll and slit to the required width, and rewind. |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ500mm |
| 原料卷寬度 Width of the raw material roll | Max.1300mm |
| 原料卷內徑 ID of the raw material roll | Φ76.2mm |
| 原料卷重量 Weight of the raw material roll | Max.500kg |
| 收料卷外徑 OD of take-up roll | Max. 500mm |
| 收料卷內經 ID of take-up roll | Φ76.2mm |
| 切割厚度 Slitting thickness | 0.05-0.5mm |
| 分切方式 Slitting mode | 懸空刀片分切 Dangling knives slitting |
| 分切寬度 Slitting width | Min.10mm |
| 分切速度 Slitting speed | 0-15m/min |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 |
| 加熱調節控制溫度 Heating temperature control | 50-200℃ |
| 糾偏精度 Error-correct precision | 0.1 |
| 供電電壓 Power supply voltage | AC 380V |
| 電動機 motor | 7.5kw, 1440r/min |
| 外形尺寸 Overall size | 4600mm*2115mm*1610mm |
| 重量 Weight | 5500kg |
J7017 Ⅱ/ZF 1700mm 光學膜分切機
J7017 Ⅱ/ZF 1700mm Optical Film Slitting Machine
| 名稱 Name | J7017 Ⅱ/ZF 1700mm 光學膜分切機 J7017 Ⅱ/ZF 1700mm Optical film slitting machine |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ700mm |
| 原料卷寬度 Width of the raw material roll | Max.1700mm |
| 原料卷內徑 ID of the raw material roll | 3′，6′ |
| 原料厚度 Thickness of the raw material | 0.02-0.35mm |
| 分切條寬度 Slitting width of the strips | Min. 300mm |
| 收卷直徑 Diameter of winding | Max. Φ600mm |
| 收卷軸直徑 Diameter of the take-up reel | 3′，6′ |
| 分切速度 Slitting speed | 20m/min |
| 切割方式 Slitting mode | Air knife |
| 收卷方式 Winding mode | Center drive; synchronous take-up of the upper and lower groups |
| 邊料寬度 Width of the rim charge | 10-20mm |
| 邊料收卷直徑 Winding diameter of the rim charge | Φ400mm (spiral winding) |
| 電源 Power supply | Three-phase 380V ±10%, 50Hz,20kw |
| 外形尺寸 Overall size | 4200mm*3200mm*2100mm |
| 選配件 Optional accessory | 料卷裝卸車 Material roll loader |
| 名稱 Name | J70700-24/ZF 電池極片分切機 J70700-24/ZF Battery pole piece slitting machine | J70500-28/ZF 電池極片分切機 J70500-28/ZF Battery pole piece slitting machine |
| 用途 Application | 用于分切鋰離子電池的電極材料 To slit the electrode material of Li-ion battery | 用于分切鋰離子電池的電極材料 To slit the electrode material of Li-ion battery |
| 原料卷直徑 Diameter of the raw material roll | Max. Φ600mm | Max. Φ600mm |
| 原料卷寬度 Width of the raw material roll | Max.700mm (常用 usually use 650mm) | Max.520mm |
| 原料卷內徑 ID of the raw material roll | Φ75mm (兩端錐套 taper sleeves of both ends) | Φ75mm (兩端錐套 taper sleeves of both ends) |
| 成品卷直徑 Diameter of the product roll | Max. Φ450 (寬度30mm以上 width is more than 30mm) | Max. Φ450 (寬度30mm以上 width is more than 30mm) |
| 成品卷最小寬度 Width of the product strip | Min. 36mm | Min.30mm |
| 放卷糾偏精度 Error-correct precision of pay-off | ±0.1mm | ±0.01mm |
| 切割厚度 Slitting thickness | 總厚度Total thickness 100-350μm, 鋁箔Aluminum foil 10-30μm, 銅箔copper foil 8-20μm | 總厚度Total thickness 100-350μm, 鋁箔Aluminum foil 10-30μm, 銅箔copper foil 8-20μm |
| 收卷軸直徑 Diameter of the take-up reel | 3′′ (氣脹機械滑差軸 mechanical air slip shaft) | 3′′ (氣脹機械滑差軸 mechanical air slip shaft) |
| 同時收卷軸數量 Quantity of synchronous take-up reels | 2 | 2 |
| 分切速度 Slitting speed | 50m/min (連續可調 adjustable continuously) 正常速度 common speed 5-30m/min | 50m/min (連續可調 adjustable continuously) 正常速度 common speed 5-30m/min |
| 電源 Power supply | 三相四線式 Three-phase four-wire 380V | 三相四線式 Three-phase four-wire 380V |
| 分切寬度精度 Slitting width precision | ±0.1mm | ±0.1mm |
| 分切極片毛刺 Slitted Pole piece burr | ＜10μm (涂布層外 out of the coating layer) | ＜10μm (涂布層外 out of the coating layer) |
| 外形尺寸 Overall size | 主機 Main machine 2450mm*1950mm*2200mm | 主機 Main machine 2300mm*1950mm*2200mm |
J8608/ZF 8米套管纏繞機
J8608/ZF 8 Meters Sleeve Winding Machine
1、卷繞長度 Winding length 8000mm（Max）
2、卷繞成品直徑 Product diameter 80mm～1000mm（Max）
3、卷繞成品重量 Product weight 1500Kg（Max）
4、皺紋紙帶 Crepe paper tape 整盤重 the coil weight 8Kg（Max）
寬度 Width 76mm
厚度 Thickness 0.305mm
最大外徑 Max. OD 500mm
內徑 ID 76mm
5、紙帶張力檢測與調整 The tension detection and adjustment of the paper tape
張力大小0～10Kg，自動調整Tension 0-10kg, adjust automatically
6、送紙小車的行走速度與主軸轉速按工藝要求匹配，疊包率：1/2
The moving speed of the paper sending car matches with the rotation of the main shaft according to the process requirements. Overlapping ratio:1/2
7、車頭中心高 Height of the head center 1250mm
8、主軸0～200rpm無級調速，并帶有停車、倒轉功能
0-200rpm stepless speed adjustment for the main shaft. It has the functions of stop and reversing
9、帶有3個夾頭自動居中的卡盤，卡盤最大夾持直徑160mm
The automatically centering chuck with 3 clamping heads; Max. clamping diameter of the chuck 160mm
10、配有靜電消除器，自動消除紙卷表面靜電
It has electrostatic eliminator which can eliminator static electricity from the paper surface automatically
11、配有自動激光標線定位 With laser marking positioning
TYJ-160型套管電容芯子條卷機(J8616-2/ZF)
TYJ-160 Sleeve Capacitor Core Lap Former (J8616-2/ZF)
1. 卷繞長度 Winding length ≦16m
2. 卷繞成品直徑 Winding product diameter 最大 Max. Ф650mm
3. 芯管外徑范圍 OD range of the core tube Ф81～Ф150mm
4. 芯管內徑范圍 ID range of the core tube Ф51～Ф130mm
5. 芯管最大長度 Max. length of the core tube 16m
6. 卷繞芯子（工件）最大重量 Max. core weight 4噸 tons
7. 包扎紙帶 Bandaging tape
寬度 Width 90mm
紙卷外徑 OD of the paper coil Ф470mm
紙卷內徑 ID of the paper coil Ф76mm
平板紙帶厚度 Flat paper tape 0.09～0.13mm
皺紋紙帶厚度 Crepe paper tape 0.305mm；延伸率 Elongation 55%
8. 放紙小車一次可裝紙盤6盤紙卷；可裝鋁箔卷1盤
6 paper coils can be installed in the paper seeding car; 1 aluminum foil coil can be installed
9. 紙帶張力檢測與調整
平板紙帶 Flat paper tape 自動/手動調整 Automatically/Manually adjustment
皺紋紙帶 Crepe paper tape 自動調整 Automatically adjustment
10. 放紙小車的行走速度與主軸轉速按工藝要求匹配，疊包率：50%±0.5mm
The moving speed of the paper sending car matches with the rotation of the main shaft according to the process requirements. Overlapping ratio: 50%±0.5mm
11. 車頭中心高 The height of the head center 1180mm
12. 主軸10～240rpm無級調速，有剎車離合裝置
10-240rpm stepless speed adjustment for the main shaft; with the brake clutch device
13. 配有靜電消除裝置，自動消除紙卷表面靜電
It has electrostatic eliminator which can eliminator static electricity from the paper surface automatically
14. 配有加熱輥，最高溫度300℃±20℃，自動控溫
It contains heating roll; Max. temperature is 300℃±20℃; automatic temperature control
15. 配有烘燈，烘烤長度16m，加熱管雙排26根。距離工件200mm處溫度為70±5℃
It has the oven lamp with 16m bake length. 26 pcs of the heating tubes in two rows. The temperature is 70±5℃ 200mm away from the workpiece
16. 配有自動激光標線，兩端定位，距離15m。自動移動范圍，左端0-7300mm，右端4200-15000mm；標線重復精度1mm
It has the automatic laser marking positioning in two ends. The distance is 15 m. the automatic moving range, left end 0-7300mm, right end 4200-15000mm; Marking repeatability is 1mm
J83-6/ZF型3米套管卷繞機
J83-6/ZF 3 Meters Sleeve Winding Machine
1. 卷繞能力 Winding capability 0～20m/min
2. 套管外徑 Sleeve OD MaxΦ220mm
3. 卷繞寬度 Winding width Max3000mm
4. 托輥加熱溫度 Supporting roller heating temperature 50℃～150℃
5. 芯管內徑 Core tube ID Min Φ26mm、Max Φ94mm
6. 芯管外徑 Core tube OD Min Φ37mm、Max Φ101mm
7. 芯管長度 Core tube length Min 1220mm、Max 3370mm
8. 紙張預干燥 Paper pre-drying 由紅外加熱器加熱 heated by infrared heater
9. 鋁箔插入點激光自動指示
Laser automatic indication in the insertion point of the aluminum foil 指示范圍 indication range 左 left 0～1m，右 right 0.6～3m
10. 原紙卷重量 Paper coil weight Max 600Kg
11. 原紙卷外徑 Paper coil OD Max 600mm
12. 紙卷內孔直徑 Inner hole diameter of the paper coil Φ76mm、Φ90mm
13. 紙張寬度 Paper width
平板紙 Flat paper 3m/2m/1m
皺紋紙 Crepe paper 1.5m×2
14. 紙張厚度 Paper thickness 平板紙 Flat paper 0.09～0.15mm; 皺紋紙 Crepe paper 0.305mm
15 .平板紙紙張張力 Flat paper tension Max 500N/m
J8008-10/ZF 型多元件線圈繞線機
J8008-10/ZF Multicomponent Winding Machine
| 繞線轉速 Winding speed | 0～200rpm,無極可調 |
| 繞制材料 Winding material | 漆包線 |
| 繞制線徑 Winding diameter | 0.05mm～0.35mm |
| 工位數 Work position number | 等徑或變徑單元，數量≤30 個 Equal diameter or different diameter, quantity ≤30 |
| 排線行程 Traverse stroke | ≥200mm |
| 排線寬度 Traverse width | 0.05mm～1mm |
| 匝數精度 Turns precision | ±0.5 匝turns |
| 電源電壓 Power voltage | AC220V±5%,50Hz/(60Hz) |
| 設備總功率 Total power | ≤1.5KW |
| 安全標準 Safety standard | 符合 CE 要求 Conform to CE requirements |
| 設備外形 Overall size | 600X400X400(mm) |
| 設備能滿足工裝為塔型（變徑）及圓柱型（等徑）多組元件的繞制。 The equipment can meet the winding requirements of many components in tower shape (different diameter) and column shape (equal diameter). |
| 該設備將繞線機構和排線機構合為一體，繞線主軸邊旋轉繞線邊沿 X 軸向移動，實現繞排一體。 This equipment combines the winding mechanism and traverse mechanism together. The winding main shaft winds with rotation as moves in X-axis direction to realize the winding and traversing in one. |
| 該設備的放線機構增加了 Z 向升降功能，從而實現多組不等經塔型元件的自動跨槽連續繞制功能。 The equipment adds Z direction lifting function in the pay-off mechanism, which can realize groove crossing continuous winding automatically for different diameter tower shape components. |
| 該設備繞制工裝的設計，在工裝基礎上增加自動跨線槽，實現多個元件的連續繞制。 The equipment adds the wire groove crossing on the basis of tooling which can realize continuous winding for many components. |
| 該設備采用 CNC 數控系統，根據不同產品及工藝要求調用不同程序，操作極其方便。 This equipment adopts CNC numerical control system. It will call the different programme according to the different products and technique requirements. It can operate conveniently. |
P74009/ZF 型紅外焦平面探測器自動粘片機
P74009/ZF Infrared Focal Plane Detector Automatic Die Bonder
| 玻璃基板尺寸 Glass base plate size | 3″/4″/6″，厚度 thickness 4mm～7mm |
| 晶片材料 Crystal chip material | 碲鋅鎘、銻化銦 CdZnTe、 InSn |
| 晶片尺寸 Crystal chip size | 規則晶片 Regular crystal chip 3×10mm（Min）80×80mm（Max） 不規則晶片 Irregular crystal chip（圓弧直徑 Arc diameter）≤120mm |
| 加熱溫度 Heating temperature | 25℃～80℃（可定可調 adjustable） |
| 陪邊 Edge | 規則晶片要有陪邊： 4 條，寬度 4mm The regular crystal chip with edges: 4, thickness 4mm |
| 陪邊要求 Edge requirement | 100 倍放大鏡檢測下人工輔助完成無明顯縫隙拼接 Accomplish no obvious gap splicing manually under the test by 100 times magnifying glass |
| 用途：自動粘片機主要用于碲鋅鎘、銻化銦等紅外器件晶片的自動粘接。 Application: the automatic die bonder is mainly used to bond CdZnTe and InSn Infrared crystal chip automatically. |
| 晶片上表面與基板上表面平行，允差≤2μm（晶片與基板自身平面度≤2μm） The crystal chip surface is parallel with the base plate surface. Tolerance≤2μm (Flatness of the crystal chip and the base plate ≤2μm) |
| 粘接完固化采用常溫自然冷卻 solidification after bonding uses natural cooling in normal temperature |
| 設備組成：設備由底座、上料機構、抓取機構、滴蠟機構、旋轉載片臺、擠壓機構、下料機構、三維平臺、大理石臺面、放料工位、防護門罩和電氣控制系統等組成。 The equipment composition: the base, material feeding mechanism, grab mechanism, wax dripping mechanism, rotary chip stage, extruding mechanism, unloading mechanism, 3D platform, marble table, material discharging position, protection door cover and electrical control system etc. |