650mm森吉米爾型二十輥軋機

650mm Sendzimir 20 Rolls Mill

用途 Application

650mm森吉米爾型二十輥軋機是在常溫狀態下，將厚度為Max1.2mm的不銹鋼，經若干道次軋制，軋制成各類規格的具有所需厚度和表面粗糙度的冷軋帶卷。

650mm 20 rolls Sendzimir Cold Mill is used to roll Max. 1.0mm thickness  stainless steel at normal temperature state to the cold rolled strip coils of different thickness and surface roughness.

性能指標 Technical data

1. 來料規格 Materials specifications

1）入口重卷段 Entry recoiling parameters

材料 Material SUS200、SUS300不銹鋼 stainless steel

來料狀態 Material state             退火冷軋料 Annealing cold rolled material

寬度 Width                                       450-750mm

厚度 Thickness                                  0.08-1.2mm

卷徑 Coil diameter                Φ508/Φ1000-Φ1800mm (含襯紙 including the lining paper)

卷重 Coil weight                                Max 12600kg

2）軋制段 Rolling part

材料 Material SUS200、SUS300 不銹鋼 stainless steel

來料狀態 Material state               退火冷軋料 Annealing cold rolled material

寬度 Width                                   450-650mm

厚度 Thickness                               0.08-1.2mm

卷徑 Coil diameter                            MaxΦ1800mm (含襯紙 including the lining paper)

卷重 Coil weight                           Max 11000kg

2. 成品規格 Product specification

1) 軋制段 Rolling part

寬度 Width                                     450-650mm

厚度 Thickness                                 0.05-0.3 mm

卷徑 Coil diameter                          MaxΦ1800mm (含襯紙 including the lining paper)

卷重 Coil weight Max                      11000kg

2）出口重卷段 Outlet recoiling part

寬度 Width                                          450-750mm

厚度 Thickness                                     0.05-0.3 mm

卷徑 Coil diameter                  Φ508/Φ1000-Φ1800mm (含襯紙 including the lining paper)

卷重 Coil weight                                   Max 12600kg

技術參數 Technical parameters

1. 入口重卷參數 Entry recoiling parameters

高速段 High speed period Max 190m/min       張力范圍 tension range 1.44~14.4KN

低速段 Low speed period Max 110m/min       張力范圍 tension range 2.4~24KN

卷筒 Reel                                                         Φ508×850mm

減速機速比 Speed ratio of the reducer            16.87/10.12

傳動電機 Driving motor                  DC67KW，0-450-1500r/min, 400V   風冷air cooling

2. 左右卷取參數 Parameters of coiling left and right

低速段 Low speed period Max 180m/min      張力范圍 tension range 13.5~135KN

高速段 High speed period Max 300m/min      張力范圍 tension range 6.5~65KN

卷筒 Reel  Φ500x850mm

減速機速比 Speed ratio of the reducer             10.22/4.92

傳動電機 Driving motor                     DC500KW, 0-362-1200 r/min，440V，水-空冷卻 water-air cooling

3. 軋機參數 The rolling mill parameters

工作輥直徑 Working roll diameter                        Φ45mm

第一中間輥直徑 The first intermediate roll diameter     Φ71.4mm

第二中間輥直徑 The second intermediate roll diameter          輥?zhàn)又睆?the roll diameter  Φ127.8mm

背襯輥軸承 The backing roll bearing                               Φ225mm

最大軋制力 Max. roll force                                              2000KN

軋制扭矩 Rolling torque                                                11.5KN·M/5.7KN·M

軋機開口度 The rolling mill opening                      3.25mm（公稱軋輥直徑時，軋輥直徑減小，開口度增大 when in the normal roll diameter，the roll diameter decreases and the opening increases）

軋制速度 Rolling speed                                                      Max 300m/min

減速機速比 Speed ratio of the reducer                                    1

軋機傳動電機 The rolling mil driving motor                   DC500KW, 0-362-1200 r/min，440V，水-空冷卻 water-air cooling

4. 出口重卷參數 Outlet recoiling parameters

速度 Speed                                          190m/min      張力范圍 tension range  1.26~12.6KN

卷筒 Reel                                              Φ508x850mm

減速機速比 Speed ratio of the reducer                          12.38

傳動電機 Driving motor                              DC49KW，0-450-1500r/min,400V